Control panel labels

[Ham_Hog]

I have an '86 Elandan and need some help with the control panel that sits above the stove top.
The panel is working from what I can see but the problem is with the labels, most are so worn off I can't tell what they say.
Is there someplace I can get a diagram or good picture of this control panel so I can relabel it?
Thanks,
Bruce

[JimM68]

how about a picture of your panel to start with.

[Ham_Hog]

Actually after posting this question I did a search here on this forum and found some pictures of the exact control panel that is in mine.

But now I have a question about some of the labels..I see a rocker switch
labeled H.T. 1 on top and H.T. 2 on bottom, are these the gray water and black water tank select switch's to tell you how full they are? Which is
gray water tank? HT1 or HT2?

There is another rocker switch to the left of the one labeled water pump..I can't quite make it out but I can see water at the top but can't make out the writing below..tank maybe? the water (potable) tank level select?

Now if I could find a wiring diagram for this control panel..not that there is a problem but just thinking ahead.
Thanks,
Bruce

[Ham_Hog]

Ok..just answered my own question about the switch to the left of water pump..it is water level..

[Ham_Hog]

New info on the label issue with this control panel in my '86 Elandan..

Looking at the switch labeled "Water Level" at the top, at the bottom
it says "HT 3" (?) A third holding tank? Ok so there is potable water tank, gray water tank and black water tank..
Wouldn't the "Water Level" switch show the potable water tank level? The
switch for "Water Pump" below says "LP gas" so this panel is different than
the one I saw online here..
Can anyone explain the 3 tanks plus "water level" switch?
Sorry just a little confused now..
Thanks,
Bruce