I have a 1999 Pace Arrow vision. I am trying to locate the multi pin code reader port. My mechanic can't find it. The down loaded manual is very poor. The book is saying it's on the right of the vehicle. But I just don't see it. Does anyone know where they hid it?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I believe it's on the right side of the steering column. It's usually hidden and you may have to look behind the plastic panel under the dash, etc. --it also may have a cap on it ...i.e. it's not easy to spot just by glancing at the right side of the steering column as you may have to dig around a bit.
But somebody who has the same year and model as yours I'm sure will let you know exactly where to find it.
I had a 99 PA Vision 36B. The port on mine was almost on the floor, on the firewall, on the left side of the column. I had a driver side door and using it was the best way to access it.
__________________
2013 DS 4338
2015 F-150 toad with kayaks,bicycles and a Harley in the back
On mine there is only the level control module down near the floor. Plus on the firewall in same location is a relay box with red trim. No data port. My rip-off downloaded chassis service manual shows a very poor confusing diagram of the locations being on the passenger side. Nope, not there either. I'll keep looking.
Linear Mode
