HELP!!!!!! Need help have a 2002 Gulfstream 36ft with a Dewald leveling system and also for two slide outs. My front two jacks have failed. I worked with the Techs at Lippert to troubleshoot the determine the front jacks seals are gone. The old timer techs said they use to make a rebuild kit for the jacks and handed me off to the parts department. Got a young girl saying lippert has nothing and that they are obsolete. So I asked if they have jacks that could replace the bad jacks and was told no sorry and good luck. SOOO now I have looked everywhere for used jacks and nothing. My jacks don't leak on the outside the seals inside are worn and they creep until full extension. I cant find replacement seals of a shop to do it. Was told I would have to change out the entire system. Being an engineer may years ago I find it hard to believe you cant tear down a cylinder and replace it but time have changed. Looking for any help or direction of possible replace jacks or cylinder shop that could possibly help. Thanks
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Winnebago Owners Club Fleetwood Owners Club Holiday Rambler Owners Club
Join Date: Dec 2011
Location: North East Florida
Posts: 2,163
I am sure if you look hard enough, you'll find a shop that is willing to rebuild your levelers. P&H hydraulic in Jacksonville Fl. is one that I know of. :I'm sure there are many more.
__________________
2019 Horizon 42Q
Cummins L-9 450 HP
Maxum Chassis / IFS with Tag
I am sure if you look hard enough, you'll find a shop that is willing to rebuild your levelers. P&H hydraulic in Jacksonville Fl. is one that I know of. :I'm sure there are many more.
That’s awesome. I’ll give them a call. I’m in southern florida so there close enough Thanks again
Most any farm hydraulics shop could rebuild jack cylinders.
__________________
2000 Winnebago Ultimate Freedom USQ40JD, ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;GS Life member,FMCA" My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
Linear Mode
