Community Forums

oneknight · 08-09-2021, 11:30 AM

I've been having some trouble with my carefree marquis door awning.

I've got everything dialed in now except the out limit.
The motor just keeps going as long as I hold the switch to "extend".
It goes all the way open, arms lock, fabric gets loose motor keeps going and going and going.

I was able to adjust the in limit just perfect without a problem.

Is it possible to go "too far"?
If you do is there a way to get it back?

Or do I just don't do that and let go of the switch when it's all the way out?

Sent from my moto z3 using iRV2 - RV Forum mobile app

gjames50 · 08-09-2021, 12:36 PM

See 'Setting the Motor Limits' of the service manual located here: https://www.carefreeofcolorado.com/d...ice-Manual.pdf

If you see no change you may have to fix the limit switch (or replace the motor if it is not serviceable).

gjames50 · 08-09-2021, 12:42 PM

This may also be a helpful reference: https://www.tesstools.net/Carefree_R..._p/r001750.htm

I don't know if this is a part number for your unit but the instructions/description on this website my prove helpful.

Good luck!

oneknight · 08-10-2021, 04:42 AM

Quote:

Originally Posted by gjames50

This may also be a helpful reference: https://www.tesstools.net/Carefree_R..._p/r001750.htm

I don't know if this is a part number for your unit but the instructions/description on this website my prove helpful.

Good luck!

"Up to 120 turns"??? Wow! I guess I didn't turn it too far then!

I did break down and adjust the white screw, that's the in limit on my awning, and the important one. I'll keep trying then. Thanks