I just purchased a 2008 Tiffin Phaeton and I found my driver side break lights do not work. The previous owner just had it inspected so they had to work at that time. I am new to the RV owner world.
I have checked the connector and the bulbs. Thoughts?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
So you've tested the bulb socket with a volt meter or a 12 volt test light ?
Does your coach use that same bulb for brake light and turn signal ?
Some chassis manufacturers , have a rear wiring fuse box at the back of the coach , for the rear lights and trailer plug.
Can you add your coach's chassis manufacturer to your post .
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
I have had this happen twice on my current coach, and once on my previous one. Each time it was the socket. Remove the bulb and clean the socket contacts. Make sure the bulb makes good tight contact with the socket.
__________________ Craig and Susan
Morgan Hill, CA 2007 Newmar Kountry Star 3910 towing a 1998 Ford Explorer. RVing since gas was 58 cents a gallon. Amateur Radio Operator (W6ADV) since 1962.
Linear Mode
