Fireplace help

[Skipper Bob]

Can someone give me a link that will show how to remove the blower motor from an electric Fireplace in a 2000 Rexhall aerbus. I don't want to build a rocket ship or rebuilt a jet motor. I just want to get the blower out so I can lube it. Ugh!!! In Advance Thank You.

[Ray,IN]

Remembering from years ago, I removed the entire unit and the innards were easy access. Mine didn't have a blower motor, I was replacing light bulbs for the virtual flames.

[alank]

On mine, the front trim just lifted up off tabs it sat on, exposed the screws to remove the whole unit, everything accessable out the back.

[Full-Timers]

I did that very thing in my 2003 Rexhall
1. Remove the one screw, top center of the glass to remove the glass.
2. Remove the 4 screws, 2 on each side, on the inside front edge that holds the fireplace in the cabinet.
3. Slide the fireplace out and unplug it from inside the cabinet.
4. Remove the screws from around the top panel and lift the panel off.
5. The motor is now accessible.
These instructions are from memory so they may not be 100% accurate. However it is real easy to figure it out.