Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-04-2020, 01:32 PM   #1
Junior Member
 
Join Date: Jan 2018
Posts: 29
Fleetwood Bounder tie rod end boots...help!!!

I have a 2018 Fleetwood Bounder 35K. I need to replace my tie rod end rubber boots. They have deteriorated..seems to be a common problem. Does anyone know where to purchase new
Boots? Ford only sells the complete tie rod.. pn# MEOE211 FOR $330!! I don't need the entire tie rod!
. I have looked at suspension.com. they have urethane and rubber boots. I contacted them and they do not know the part number to replace my boots. I have measured my tie rod ends, but still cannot figure out what the correct replacement boot is. Has anyone done this and can give me where to go and part number for these boots?
Thank you,
Bounder3 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-04-2020, 01:54 PM   #2
Senior Member
 
LJowdy's Avatar
 
Join Date: May 2013
Location: Ontario, California
Posts: 2,429
Someone posted this in another thread The part number is 9.13126

https://www.suspension.com/search.as...&stext=9.13126
__________________
[SIGPIC][/SIGPIC]2016 Newmar Dutch Star 4369
Newmar Owners Club
USAF 1966-1969,- Law Enforcement 1969 - 2003, Retired since March 2003
LJowdy is offline   Reply With Quote
Old 04-04-2020, 07:17 PM   #3
Junior Member
 
Join Date: Jan 2018
Posts: 29
Thanks..
It still is not clear which boot they are referring to. There are two different boot for pn# 9-13126. You need the piece# to determine which boot is the one for a Fleetwood F53 chassis. So you need the piece# in addion to the 9-13126 number. I am going over to my rv tomorrow and measure the tie rod again more closely and then try to determine which 9-13126 dust boot is the correct one. Piece # 13013. Or 13014. I'll let everyone know after I measure again tomorrow.
Bounder3 is offline   Reply With Quote
Old 04-05-2020, 03:22 AM   #4
Junior Member
 
Join Date: Jan 2018
Posts: 29
Oh, wait a minute. I now see that pn# 9-13126 is sold as a set only, and is dust boots piece# 13013 & 13014. I believe that 13014 is the boot that I need.
Thanks, I'll let you know how it fits after I receive the boots.
Bounder3 is offline   Reply With Quote
Old 04-05-2020, 07:01 AM   #5
Senior Member
 
Join Date: Aug 2016
Posts: 768
This thread with pictures.


https://www.irv2.com/forums/f23/drag...nt-264528.html
__________________
Pete , Stroudsburg , PA. 2017 Tiffin 32 SA 24K Chassis
Sumo Springs, Safe T Plus, F&R RM SB, R-TB, Front Koni FSD Quad Shocks, Rear Koni FSD Quad Shocks,2019 Jeep Cherokee Trailhawk Elite
Peter M is offline   Reply With Quote
Old 04-06-2020, 10:33 AM   #6
Junior Member
 
Join Date: Jan 2018
Posts: 29
Quote:
Originally Posted by Peter M View Post
Yes, I have replaced that drag link boot L20VC0114 on my 2018 Fleetwood Bounder last year. Also, I ordered 2 of those boots in order to have a spare. I still have the spare and will go over to the rv today to see if it fits the tie rod end. I'll let you know if it fits or not. Those oem factory boots are all crap!! Thanks for the reply!!
Bounder3 is offline   Reply With Quote
Reply

Tags
bounder, fleetwood



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tie Rod End boots..any sources??? sc3283 Monaco Owner's Forum 1 09-21-2011 10:42 PM
Tie Rod End Boots prsmith Workhorse and Chevrolet Chassis Motorhome Forum 10 07-09-2010 08:21 AM
W8003032 Tie Rod End Grease Boots- Don't make the $120 mistake fayrankin Workhorse and Chevrolet Chassis Motorhome Forum 4 11-01-2008 08:21 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 09:52 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2025, vBulletin Solutions, Inc.