First, Hi to all, and a happy new year!
I have a fuel delivery problem in my Pace Arrow, I drove it from Seattle to Florida without incident. But after sitting for a while, I tried to start it and found the ignition hard to turn. After some difficulty I managed to turn the key, but it wouldn't start. I have spark at the plugs but no fuel at the rail. I do not have a schematic to work from, so I can't trace the problem through it's pathway. I tested the inertia switch and found the voltage to be 7.5 volts. Does anyone know if there is a fuse able link on the ignition side of the wiring? Is my problem a bad Fuel pump relay, a fuel pump relay control, or a bad fuel pump? I have tried without success to find a drawing of the fuel circuit to no avail. Any help or advise? thanks DL
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
It has a fuel pump relay,you found the inertia switch.The pump needs 12 volts,you may have dead battery,or bad or corroded conections.The switch should be same as a pickup or van.
Linear Mode
