Slide issue-HELP
We have a 2019 Winnebago Forza 34 t, P/S slide recently had wiring harness replaced(NIRVC). Today the D/S extended and retracted W/O an issue.The P/S slide (front) moved an inch and stops. Rear part doesn’t move. Panel shows p/s fault. The batteries are original(5/20). I confirmed no obstruction inside. Slide breaker was active.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
We have a 2015 Forza 34T but it has the older Lippert slideouts. On ours, there is a way to look at the error codes on each controller to determine why the slideout fails. Your could be the "new" wiring harnesses loose or bad or could be the motor failed. I would start at the controller and work back from there using a multimeter to check the connections.
Linear Mode
