Fuel pump hose fitting

[RoaminRichards]

I have an Onan 5BGEFA26100P 5,000 watt aux generato rin my class A motorhome. My fuel line from the generator fuel pump to the fuel filter developed a leak. I have been unsuccessful in my attempt to buy a replacement fuel line for this generator due to its age. I contacted Cummins-Onan about my problem and was told this generator and its parts are no longer made. I am now trying to put on a rubber fuel hose as a replacement. My current problem is trying to locate a barbed 1/4 inch male fuel fitting to use to connect my hose to the generator fuel pump. I have checked with local auto parts stores, Ace hardware stores and Lowes. No one has the fitting I need to connect to my fuel pump. I would appreciate any assistance in resolving this issue.
Respectfully,
Herbert Richards

[bigb56]

Originally Posted by RoaminRichards

I have an Onan 5BGEFA26100P 5,000 watt aux generato rin my class A motorhome. My fuel line from the generator fuel pump to the fuel filter developed a leak. I have been unsuccessful in my attempt to buy a replacement fuel line for this generator due to its age. I contacted Cummins-Onan about my problem and was told this generator and its parts are no longer made. I am now trying to put on a rubber fuel hose as a replacement. My current problem is trying to locate a barbed 1/4 inch male fuel fitting to use to connect my hose to the generator fuel pump. I have checked with local auto parts stores, Ace hardware stores and Lowes. No one has the fitting I need to connect to my fuel pump. I would appreciate any assistance in resolving this issue.
Respectfully,
Herbert Richards

What is the size and thread type that screws into the fuel pump? Is it 1/4" barb X 1/4" pipe thread like this?

[shootist]

Go to a truck shop and buy some push to seal hose and fittings. No clamps needed, good for 300psi.