Community Forums

Hdjoe99 · 12-08-2020, 12:19 PM

We have a 2004 Georgie Boy Bellagio and need to replace the refrigerator Vent cap. Can someone direct me the correct one or at least a part number?

thanks

Unplanned Tourist · 12-08-2020, 05:16 PM

One like this?

https://www.amazon.ca/Camco-42160-Re...s%2C216&sr=8-3

https://tse3.mm.bing.net/th?id=OIP.a...=0&w=156&h=151

Hdjoe99 · 12-08-2020, 05:52 PM

Yes, this is what I need, I didn't really want to replace the base, but to just find the original top cover replacement. I went out today and did some measurements and came up with the following.

Top side of the base was 23 X 5.5 and the screw holes was 21 3/4 X 4 1/4. The base angles in so is wider at the base.

Spk64 · 12-08-2020, 05:54 PM

When I had to replace our refrigerator vent the base ended up being in worse shape than the outer cover. So replacing both made it easier. Just more work to cleanup and reseal the new base.

Pillbox · 12-09-2020, 12:15 PM

Spk64,
Same happened to me, took of top, bingo big crack. Changed both.
New dicor, new butle tape, new cover and screws.
Cleaned out the ref. From top with blower, wow a bunch of stuff.....foam, leaves, dust.
Terry

153stars · 12-09-2020, 01:04 PM

The Camco fits both Dometic and. Norcold curbs use different mount holes. Or you need the cap for your brand fridge. I would test the base to see how brittle, it starts by dry outer coating that will scrape off with your fingernail the thicker the more dead the plastic. Some of the Camco stuff is iffy but I purchased and installed base and cap, it is very good quality looks sleek and modern. It's only slightly more for pair if you want to save it in case.