Community Forums

djs0317 · 04-07-2013, 02:47 PM

I had a bearing failure on a 1996 Georgie Boy damaging the axle shaft, ad I am having trouble locating a part number. I have narrowed it down to it being a 14 bolt GM axle but the numbers on the tube don't match a GM or Dana part number. It has 30 splines which rules out Dana. The shaft has teeth around flange which mares with the hub which has the 10 studs through it. Does anyone know what type of axle shaft that is and where I can locate either a new or used one.

vtbigdog · 04-07-2013, 06:39 PM

Is this a Workhorse Chassis? If so, there is a plate on the front drivers side of the differential. If you have a W-20 the differential could be either a Dana 110 or a Dana 130....but that plate will tell you.

If you get stuck go to WorkhorseParts.com and call then. !hey will ask you for your VIN number and be able to tell you what you have for a rearend as well as all of the parts and will be able to look up any parts you may need...and at a reasonable price