Has Anyone Painted The Walls

[chunker]

You can figure that the current walls will have a lot of dirt and oils on them and unless that is removed, no paint will properly adhere.

[MotorPro]

Originally Posted by Britter210

I've seen multiple people use Kilz Adhesion Primer or Glidden Gripper Bonding Primer, but a gal on Instragram by the username RVFixerUpper swears by Behr Premium Plus Paint AND Primer all in one. I'm wondering if anyone else has tried the Behr's kind because the thought of skipping the sanding and priming for interior walls sounds aaamaaaazing.

I used Behr paint and primer in one. Covered in one coat.After 4 years looks perfect.

[153stars]

Behr is all I used in house for 30 years..all I will ever use. Raised 4 animals in house many pets too .It takes longer but a Purdy shorted nap roller Will leave the best finish.Its acrylic paint I believe.
Cut the bottom of 15yr old can still good.
Never had an issue with it not priming well ....one color less problems with edges as supposed to white primer and color. Also frog tape best edges.Hate to say but ....3M blue not so much.

[Dav L]

Originally Posted by Spk64

I painted one set of walls to see how it worked.
Cleaned walls with TSP
Kilz Original primer
Then a good latex wall paint.
So far has held up well.

Steve, which wall did you paint? I assume our floor plans are somewhat similar.

Got a pic?

I debated redoing the wall covering in the bedroom when restoring the MA. didn't end up doing anything but cleaning them up. They were in better shape than I anticipated. I think I still have the wall covering material I bought for the job...