It sounds like the carpeted ceiling I had in my former MH. Difficult stuff to reattach but my first step would be to see if applying heat to it will activate the glue they used. You have a pretty big loose spot so that may or may not work for you. Mine was a larger area. In my case, I had to make slits in the carpet and work in smaller sections, applying new adhesive (3M) and holding it in place until the glue dried. I used a plywood board and 2 x 4's to press the plywood against the ceiling. The next section I would be careful to fit the cut seam part together using carpet seam tape applied to the ceiling, heat activated by an iron, press the seam in place carefully. It took me a lot of time over several days but it looked fine when I finished.
__________________
Mel (Melanie) and Harry
2009 Tiffin Phaeton 40QTH
2014 Jeep Wrangler Sport
|