Hello y'all I'm new to the site and am tearing into a Winnebago brave I'm salvaging all components out of this poor RV to build a "skoolie" I would like to transfer the holding tank monitoring system but the previous owner relocated it to above the fridge and he said that it hasn't worked since it is a rats nest of wiring behind it. The only thing I've been able to figure out is the pump wiring because it doesn't go into the circuit bored..... The sticker on the back of the panel says "Jensen model number 7015" but I can't even find a picture of it on line let alone a wiring diagram. I will post a picture soon but if I could get some help with this that would be great.... Thank you
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Country Coach Owners Club Appalachian Campers Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
Hello and We are glad to have you join us here and we look forward to reading of your adventures and experiences. I am sure you will enjoy our website and forums. Good luck, stay safe and keep us posted.
What year is the Winnebago?
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
Unfortunately it doesn't give any information on the holding tank monitor panel. I think they it calls it a control panel but that's it. So I tried just typing in 83 Winnebago brave control panel and all I get is a Chiefton control panel which is part of the range hood
Well the wiring coming from my control panel is only like 24ga wire where as everything else is 18 or bigger.... And I traced the wires from my fresh tank to my panel and the colors it hooked to were different... Idk if it's right right though bc it doesn't work.... That's why I was looking for a diagram to trace it all back and start from scratch
We are glad to have you join us here and we look forward to reading of your adventures and experiences. I am sure you will enjoy our website and forums. Good luck, stay safe and keep us posted.
Linear Mode
