Mine was 2 pieces of 1/8 glass with 3/16x3/16 spacer. I put the spacer 5/16 in from the edge and filled with sealer. I had to buy 66 ft of the spacer, but it was around 60 dollars. If yours happens to be the same spacer, I'll give you enough for yours.
Mine has curves and such being a driver side glass. The glass place that was going to get it, did a trace on a piece of large paper to send in to the houston place he gets them from. He said there are 4 or 5 places that cut and temper the glass. If you have a tint, matching that is the main challenge. A glass place can glance at it and tell you what it is. If you try the vinegar, you might be surprised.
This guy explained it well.