 |
04-18-2016, 09:36 PM
|
#1
|
|
Junior Member
Join Date: Feb 2015
Location: Cincinnati, Ohio
Posts: 12
|
Howard PCS Installation manual-complete
I have scanned the complete Howard PCS system installation manual into a PDF that I can email to interested persons...
What I need is the dimensions of the clip that goes onto the shaft of the cylinder unit. How wide is it?
Since that is the measurement for calibrating/centering the cylinder.
Thanks, Mark
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
04-19-2016, 01:44 AM
|
#2
|
|
Moderator Emeritus
Country Coach Owners Club Appalachian Campers Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
|
Contact the manufacturer and speak to tech support.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
|
|
|
|
|
04-19-2016, 03:37 AM
|
#3
|
|
Junior Member
Join Date: Feb 2015
Location: Cincinnati, Ohio
Posts: 12
|
Howard PCS
Howard PCS has been out of business since around 2003...I need the dimensions from someone that has one installed.
Mark
|
|
|
|
|
04-19-2016, 10:21 AM
|
#4
|
|
Member
Triple E Owners Club
Join Date: May 2015
Location: Were I Am Parked
Posts: 47
|
You might try this link:
So, where are we at this point in time?
•The company still exists and is reorganizing
•The goal is to provide service support for existing installations and install new systems
• Current customers can contact the company at 800.879.4277 and talk to a real human (Sam Kopecky)
• Any other inquiry should be directed to info@hpcss.com - I'm assured that every email will be answered
from the website
Installation of the Howard Power Center Steering
hopefully this will help you.
__________________
2004 Triple E 3903 Empress 400 ISL
|
|
|
|
|
04-19-2016, 10:27 PM
|
#5
|
|
Junior Member
Join Date: Feb 2015
Location: Cincinnati, Ohio
Posts: 12
|
Gonervn,
Thank you for the links, however I have left messages and emails...never a reply.
I just need to know the length of the plastic alignment barrel of trim portion of the cylinder. I think it is a 1/2", but would like verification.
BR, Mark
|
|
|
|
|
04-20-2016, 09:57 PM
|
#6
|
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,982
|
Nothing to add, I just had to find out what PCS meant. My ingrained definition of PCS is Permanent Change of Station.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
|
|
04-21-2016, 12:39 AM
|
#7
|
|
Junior Member
Join Date: Feb 2015
Location: Cincinnati, Ohio
Posts: 12
|
Ray, Power Center Steering = PCS
|
|
|
|
|
04-21-2016, 10:18 PM
|
#8
|
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,982
|
Quote:
Originally Posted by mcorcoran
Ray, Power Center Steering = PCS
|
This reminded me of what a civilian secretary did once. In the Army COB means close of business. She needed a paper returned from the General's office first thing in the morning, so she put a note on the top that she needed it by SOB.  General was NOT impressed.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
|
|
10-14-2016, 10:35 AM
|
#9
|
|
Junior Member
Join Date: Mar 2016
Posts: 1
|
Howard IManual
Quote:
Originally Posted by mcorcoran
I have scanned the complete Howard PCS system installation manual into a PDF that I can email to interested persons...
What I need is the dimensions of the clip that goes onto the shaft of the cylinder unit. How wide is it?
Since that is the measurement for calibrating/centering the cylinder.
Thanks, Mark
|
Please send Pdf to Busnut64@gmail.com Thanks
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
