I have a 1998 Holiday Rambler Endeavor 34'. My hydraulic leveling system was working fine, I used them to level MH in driveway to get ready for first trip this year. Retracted them, got to our campsite and 1 of the jacks would not go down at all. I believe the leveling system is HWH 210 series.
The following link on page 17 shows my controller.
www.hwhcorp.com/ml11428-55hm.pdf
I pulled all the plungers out of the control manifold, which are labeled as 14 & 15 on page 17. What I found puzzles me, as the 4 pressure plungers were all identical with springs inside to push the plunger up. But the 4 return plungers, 1 plunger has a small ball bearing located at the bottom below the plunger.
All the plungers have a concave end on them as if there should be the ball bearing at the bottom. I can not find any exploded diagrams of the inside of the control manifold only what I found in the link above.
Does anyone have experience with this controller and the way it operates and the internal parts of this controller. I would like to know what it should be before I go any further. I did call HWH for tech support and was told they are really backup and might be 2 weeks before I receive call back. Any assistance would be appreciated.
Thanks , Dave