|
01-13-2013, 01:57 PM
|
#1
|
Junior Member
Join Date: May 2011
Posts: 22
|
HWH jack an slide problem
went out 2 days ago to prep motor home for our next trip. large slide wouldn't come out, pump is running, bed slide moved slowly,then tried jacks they made contact with ground but wouldn't raise m/h thanks
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-13-2013, 02:01 PM
|
#2
|
Senior Member
Monaco Owners Club Winnebago Owners Club
Join Date: Sep 2011
Posts: 7,469
|
Check hydraulic fluid level and battery condition, if not on shore power.
__________________
US Navy Vet, Liberty Tree Member of Oath Keepers, NRA & VFW Life Member, Alaska EMT.
2009 Safari Cheetah 40 SKQ
2009 Winnebago Chalet 231CR
|
|
|
01-13-2013, 03:20 PM
|
#3
|
Senior Member
Newmar Owners Club
Join Date: Jul 2006
Location: Wellington, Florida
Posts: 13,599
|
Hi virgil shus,
May I assume the weather is cold where the coach is stored? If this is true, do not worry, unless something just flat will not work. Cold weather and the systems in our coaches is not a good mix. Heat the coach and basement up to 65 degrees or so and see how things work.
__________________
Gary
2005 Newmar KSDP 3910 + GMC ENVOY XUV 37K lbs Moving Down The Road
The Avatar Is Many Times Around The USA
Nobody Knows Your Coach Like Somebody Who Owns One Just Like Yours
|
|
|
01-13-2013, 05:58 PM
|
#4
|
Senior Member
Monaco Owners Club
Join Date: Mar 2011
Location: Almond, Wisconsin
Posts: 1,512
|
Gary I checked his profile and it said West Palm Beach, FL. I hope it's not to cold so maybe it's a fluid level problem or a bad leak. Jim
__________________
2006 Monaco Camelot 40 PAQ 400ISL - Toad Jeep Grand Cherokee - DW is the Nagivator. Retired to travel and everything revolves around the price of diesel.
|
|
|
01-14-2013, 07:42 AM
|
#5
|
Junior Member
Join Date: May 2011
Posts: 22
|
HWH jack an slide problem
yes i'm from fl. My battery is fully charged and the hyd fluid is 1" from top of tank. i had the engine running when operating hyd jack and slide system was used, it seems to be low hyd pressure. I'm thinking it could be the shuttle valve from what I have read.
2006 winneago voyage 38j
|
|
|
01-14-2013, 07:48 AM
|
#6
|
Senior Member
Join Date: May 2007
Location: Northeast PA
Posts: 1,146
|
Make sure all the manual valves are shut on the control block.
__________________
Bob (Squidly Down Under) & Peg - 2013 Ford Focus pushing a 2011 Phoenix Cruiser 2552S
"In God we trust" to preserve our country and bring our Troops safely home.
Carry on, regardless..................
|
|
|
01-14-2013, 11:00 AM
|
#7
|
Senior Member
Join Date: Mar 2009
Location: Fredericksburg, TX
Posts: 289
|
Another thing to check. I had a very similar problem. Ended up being a bad crimp on the house battery negative connector where it was bolted to the vehicle frame ground. The jacks would go down but as soon as they were under load the pump quit. The bad connector lowered the voltage enough that nothing would work if the current draw was heavy. Had to scratch my head for a while to find that one.
__________________
Jim
2019 Lance 975
2019 Ford F350
|
|
|
01-14-2013, 04:30 PM
|
#8
|
Junior Member
Join Date: May 2011
Posts: 22
|
Thank you all for your replies. I called HWH early this morning to get on the call back list. Frank called back about noon and we discussed the symptoms. he had me remove hyd tube from shuttle valve on top of hyd manifold and cap off fitting, he then had me operate slides, they worked, diagnosis is bad shuttle valve. He made the order and said it should be here in 2 or 3 days.
2006 winneabgo voyage j38
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|