Hey Guys, Last Year I was able to do a really cool Project, Install the Lippert One Control on a 2015 Bullet Premier Travel Trailer
Here is the video I made
https://youtu.be/uklFjmKNSno
Took me a little while to figure out how everything works and how to get parts for it, since Lippert refuses to sale as aftermarket or upgrade, I had to figure on my own, after a lot search and I just started calling them and requesting replacement until all get all the parts I need it, was very expensive because most I bought from them, just the screen alone was $600 bucks, crazy, on the Travel Trailer I was able to get on the One Control
- Awning
- 2 Sliders
- Gas LP on
- Electric Heat
- Water Pump
- Awining Lights
- Main/Kitchen Lights
- Water Pump
- Fresh/Black/Grey Water Levels
I was able to Control everything on the screen or on my Phone
Since I Got a 2004 Fleetwood Diesel with 350 and 3 sliders, I started put together this new project, but now I know how everything works I was able to get everything on eBay some new some used and a lot seller would even accept offers which made me save a lot money, But I won't go to crazy on my MH, there is 2 things I would love to upgrade but I have no balls to mess it, which is the leveling system and the 2 zone thermostat so here is what I'm doing right now and I already order
Thoses parts
- 2 Awning
- 3 Sliders
- Gas LP switch
- Electric Heat
- Water Pump
- Awining Lights
- Water Pump
- Fresh/Black/Grey Water Levels
Anyone have idea if is possible to convert the old Leveling System Switch/Computer and the 2 Zone Thermostat(2 AC/Heat Pump and 2 Furnace), I was searching the Thermostat wire diagram but looks like it's works with signal and pulses to turn things on/off not sure whole One Control Module will work and read or send those signals.
I will be posting pics for the status of the Project.
Linear Mode
