Leveling pad error

[Donlock]

I turn key on, and start engine the jacks down start to beep run engine it beeps on and off. So shut it off and restart it quits.
Just wondering what it could be. Jacks are all up.
Thanks Don

[Podivin]

It might be just a little low on fluid, top off the fluid and see if that makes the error go away.

[Lt Dan]

Not all leveling systems use the fluid level to determine if the jacks are up. Look at the top of one of your jacks. If it has wires coming out of the top, then it uses a magnetic proximity sensor switch to tell if the jack is up or down. It has happened that one of the sensors has gone bad giving a false reading.