Community Forums

Steeler34 · 01-01-2015, 09:38 AM

I just picked up a 2009 35QBA. I seem to have a problem with the "floor, outside and inside" lights. The switches by the step do not turn the lights on. The WMD I have is not much help but has a mention of courtesy wiring. Also in the fuse panel under the fridge there is one fuse missing, second down on right.
Any help is appreciated.

Mkg

mel s · 01-01-2015, 10:08 AM

Quote:

Originally Posted by Steeler34

I just picked up a 2009 35QBA. I seem to have a problem with the "floor, outside and inside" lights. The switches by the step do not turn the lights on. The WMD I have is not much help but has a mention of courtesy wiring. Also in the fuse panel under the fridge there is one fuse missing, second down on right.
Any help is appreciated.
Mkg

Steeler34
The "missing fuse" may be your problem.
My Kwikee "step controls" are protected by a 15AMP fuse, but my fuse panel is in the front run bay, (notunder the fridge).

BTW, my "inside and outside step lights" only illuminate when the step switch is ON and the steps are extended.

What is a "WMD"?
Wondering.

Mel
'96 Safari

jergeod · 01-01-2015, 10:13 AM

Quote:

Originally Posted by Steeler34

I just picked up a 2009 35QBA. I seem to have a problem with the "floor, outside and inside" lights. The switches by the step do not turn the lights on. The WMD I have is not much help but has a mention of courtesy wiring. Also in the fuse panel under the fridge there is one fuse missing, second down on right.
Any help is appreciated.

Mkg

Ok first try this turn the switch by the door on then turn all the ceiling lights on now go back and turn the switch by the door off one light will go off that is your courtesy light and should be left in the on position on the ceiling and turned off by the door switch.