Anyone else have this particular system?
The autolevel function is a little weird, in that it's not 100% 'auto'.
The instructions for autolevel say to perform the autolevel, then check to ensure both rear stabilizers are in contact with the ground. And if one of them is not in contact, to manually press either left or right on the panel to extend it to the ground.
In practice, unless you're almost level to begin with, one of the rear stabilizers will in fact not be extended to the ground and will require the additional step.
Until recently, performing the additional step has worked for me. But recently when I go to extend the non-contacting stabilizer, nothing happens. At this point I just manually level the coach.
The system I had prior to this was also Lippert but had no such extra step and it was virtually flawless. The current system is very temperamental and now it suddenly exhibits this behavior as well.
Linear Mode
