RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 10-19-2016, 11:59 PM   #1
Junior Member
 
Join Date: Sep 2013
Posts: 5
Mass AIr Flow Sensor on a Chevy 454 engine with P30 chassis

How do I get to the mass air flow sensor on a 1998 Fleetwood Flair Class A RV with a Chevy 454 engine on a P30 chassis?
Cosmic Flair is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-20-2016, 07:59 AM   #2
Senior Member
 
George Schweikle's Avatar
 
Join Date: Apr 2004
Posts: 2,895
It sounds like you may want to use some cleaner spray, but have possibly never worked on or around the engine. If your '98 P30 is like my '99, the sensor is either accessible by removing the large air filter and housing under the right front wheel well, or by removing the engine cover inside the coach. While your Flair may be different, on our Safari TREK, by far the easiest way to remove the engine "doghouse" is to first remove the passenger seat. It's held by four nuts & lockwashers.

Quote:
Originally Posted by Cosmic Flair View Post
How do I get to the mass air flow sensor on a 1998 Fleetwood Flair Class A RV with a Chevy 454 engine on a P30 chassis?
__________________
George Schweikle Lexington, KY
1999 Safari TREK 2830, FMCA 190830, Safari International chapter
1995 Safari TREK 2630, 1983 Winnebago Chieftain, 1976 Midas Mini
George Schweikle is offline   Reply With Quote
Reply

Tags
454, chassis, chevy, engine, p30



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
gm engine code po102 low mass air flow signal JHaynes National RV Owner's Forum 1 08-21-2016 04:42 PM
Chev 454 P30 Chassis Engine surging - Audio clip linked! klasicecream Workhorse and Chevrolet Chassis Motorhome Forum 29 03-30-2015 07:05 PM
Mass air flow sensor hogride Workhorse and Chevrolet Chassis Motorhome Forum 3 10-06-2014 07:04 PM
Mass Air Flow Sensor Free Bird MH-General Discussions & Problems 2 11-22-2013 01:03 PM
Mass air flow sensor 8100 Trailer Towing and Tow Vehicles Discussion 1 04-09-2005 12:00 PM


All times are GMT -6. The time now is 03:09 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.