I have a 2004 Monaco Diplomat. It has three slide outs one large one on the front Drivers side and two in the bed room. The Issue I'm having is with one in the bed room. The Passenger Side Bed Slide out. Last week I had a couple heavy items stored under the bed. When I went to close the slide out....nothing. So I began to trouble shoot the issue. The Nylon Gear in the motor assembly was striped out. So I replace and bench tested the motor. Installed and nothing. I check for power at the motor plug and I have power from one wire but nothing from the other no ground. And only when I try the close side of the switch nothing on the open side. Please Note the other slides all work fine. I have check fuses and braker those are all good. So I'm thinking I might have screwed up the relay board? If anyone has experience with this type of issue, any help is appreciated.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Not sure if this will help but I had a slide issue with my Windsor. It was the safety switch on the cargo bay was not being pushed in all the way. Just something to look at.
__________________
1999 Monaco Windsor with a 330 Cummins.
Slides can be REAL TRICKEY! I just moved up from no slides to a FULL SLIDE! Also have a slide on the bed. The manufacturer of our slides are Power Gear. I had some issues but was able to gracefully recover w/o doing massive damage! LOL
My main full wall slide is connected to a swich on the tv that will NOT let you pull in the slide if the TV is out. TV as to be in stored posistion B4 the slide will come in.
My cargo doors do not have the safety switches so thats not it. The Manufacturer of the slide. It has a Venture motor. I think the manufacture might be Lippert.
Linear Mode
