Originally Posted by friendly rv
I want to thank everybody for their advise. I will be trying the different ideas but that job been on hold since my last post because it at least function. Since then I have working at other motorhome projects. I have been trying to solve the rear camera not working and finally with the process of elimination I come to the conclusion that the cable running through (i guess) the ceiling is bad. I pull the camera and plug it directly into the monitor (both ports) and everything works, but not when it plug into the cable end at the rear. The only solution I can think of is a wireless camera system or figure out how to get a new cable to the back. Can anybody offer a different choice? Any help would be a blessing.
You could try going to a local homedepot and getting pull string tie it to the end of the cable at the monitor and go out to the camera pull the wire it might work if the wire is not stapled ? then if that does not work just run a new cable down the firewall along the frame to the tail end. Then get a long electrical snake go to the bottom edge where you see the cables running up and try to snake it up to the camera,you might need 2 snakes 1 going up the edge and 1 where the camera is going across to the corner catch the snake pull it through attach the wire while pulling and attach the camera. I hope I haven confused you hope this will help..