Need Power Gear Teach Pendant 140-1176

[blkylemasc]

Does anyone have or know someone who has a Power Gear Teach Pendant #140-1176. I need to reprogram my full wall slide. I emailed Power Gear but no response yet.

[Tha_Rooster]

I guess you found out that is a high dollar item to much just to have in your tool box. Most large dealers should have one if they don't it shows how good their service department is. It shouldn't be over $100 to have them straighten it out its plug in play. I really doubt you will find one to borrow and take home. You can purchase one at PPL parts.

[CLIFFTALL]

Power Gear was bought by Lippert. Here's their contact info.

[Fiesta48]

I found some pdf files on how to work on full wall slides in Power Gear website.
PLEASE post when you find the programmer!

[Tha_Rooster]

Originally Posted by Fiesta48

I found some pdf files on how to work on full wall slides in Power Gear website.
PLEASE post when you find the programmer!

A few years back ppl Rv parts could get them per power gear at a price them around $700.

[blkylemasc]

Called PPL, on back order 4-6 weeks. Have read all documents and manual on use of pendant, just need to get my hands on one PPL list price at $475 + shipping. Local CW wants to charge 1-2 hours to program @$150/hour. They are the closest to my home, others are 2 hours away, I'll $200 in fuel for the 4 hour round trip. At this point in the season ill just wait the 2 months for the pendant. In the mean time I'll check Ebay for a used one, thanks to all for the responses.

[mchero]

Originally Posted by blkylemasc

Called PPL, on back order 4-6 weeks. Have read all documents and manual on use of pendant, just need to get my hands on one PPL list price at $475 + shipping. Local CW wants to charge 1-2 hours to program @$150/hour. They are the closest to my home, others are 2 hours away, I'll $200 in fuel for the 4 hour round trip. At this point in the season ill just wait the 2 months for the pendant. In the mean time I'll check Ebay for a used one, thanks to all for the responses.

I have one in my toolbox. welcome to use at your own risk.
í

[Swilliams458]

Can I send you a deposit and pay for shipping to borrow the pendant?
If so email me at wscott92@yahoo.com

[jpshadrock]

Originally Posted by blkylemasc

Does anyone have or know someone who has a Power Gear Teach Pendant #140-1176. I need to reprogram my full wall slide. I emailed Power Gear but no response yet.

Hello, I was wondering if you were able to get the power gear teach tool pendant 140-1176. My slide will not operate on a Fleetwood Bounder 38V.

[taphillips]

Originally Posted by mchero

I have one in my toolbox. welcome to use at your own risk.
í

Can i rent it for 1 job in florida

[mchero]

TAPhillips, sent you a PM

[Louseman]

You don't really need the teach pendant, but it will make the job easier.

See post #7 in the following IRV2.com thread:
https://www.irv2.com/forums/f258/lip...nt-455701.html

There is a link to a PDF that explains how to use the slide controller to
manipulate the slides.

[mchero]

Yes you can reprogram stop points w/o teaching pendant but its a REAL biotch! I think I'll dig out my pendant and see if I can pop her open and see if it an be reversed engineered. Will post my findings.

Trying to reprogram w/o pendant and end up costing you some bucks if your not careful. Easy to pop teeth on a gear! Those slide motors have some torque!

I'm leery about shipping my $600.00 pendant to someone like taphillips who joined in July 2013 but has one post on this forum.

[Louseman]

Let me know what you see inside that thing. If there are any chips, see
if you can read the numbers. Would be a fun project to take a swipe at.