 |
12-08-2022, 03:18 PM
|
#1
|
|
Senior Member
Join Date: May 2017
Posts: 230
|
Need replacement lug for wheel cover
Can someone help me find a replacement nut for the wheel cover on my 2018 Hurricane 29M? I'm missing one and so far I have ordered a Phoenix USA PNF98LNT Lug Nut (much too large diameter) and a Phoenix Jam Nut/Lug Nut Cover, M14 x 2mm (roughly right size, but wrong thread) from Amazon.
If someone could steer me in the right direction I would appreciate it. Thanks!
__________________
Val
2018 Thor Hurricane 29 M
2018 Chevy Equinox Tow Vehicle
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
12-09-2022, 08:54 AM
|
#2
|
|
Senior Member
Join Date: Feb 2013
Location: Sedona, AZ
Posts: 2,753
|
I would call Thor although it might be Ford.
__________________
Shell Bleiweiss
2014 1/2 Thor Challenger 37KT
Sedona, AZ
|
|
|
|
|
12-09-2022, 03:45 PM
|
#3
|
|
Decrepit Forum Advocate
Join Date: Jul 2003
Posts: 3,769
|
My notes say that the F53 uses a 14mm x 1.5. However, that's for a 19.5" wheel. You have a 22.5, correct? I'm not sure if it's the same thread or not.
Somebody who is more of an expert than I will have to chime in to confirm for sure which one you'd need. If yours is the same as the 19.5, then most likely something like this?:
SIMULATOR LUG NUT COVER/JAM NUT 14MM x 1.5MM - Tri County Wheel & Rim
|
|
|
|
|
12-09-2022, 11:43 PM
|
#4
|
|
Senior Member
Join Date: Oct 2012
Posts: 374
|
Just in case
https://zips.com/parts/wheel-simulat...Parts%20%22%5D
https://www.kaperii.com/jam-nuts I used these guys some years ago. As theroc suggests, I called and they were helpful determining what size I needed.
IIRC If you have steel wheels, somewhere on the flat front of your wheel there will be lug specs printed...
__________________
Life's A Long Song
2008 Fleetwood Terra 33L, SCT, Safety-Plus, Trac Bar, Koni, Banks Stinger, Sumos, '16 Canyon Duramax Toad
|
|
|
|
|
12-10-2022, 01:00 AM
|
#5
|
|
Senior Member
Join Date: Jun 2018
Location: Los Angeles area
Posts: 1,362
|
Quote:
Originally Posted by KeysVal
Can someone help me find a replacement nut for the wheel cover on my 2018 Hurricane 29M? I'm missing one and so far I have ordered a Phoenix USA PNF98LNT Lug Nut (much too large diameter) and a Phoenix Jam Nut/Lug Nut Cover, M14 x 2mm (roughly right size, but wrong thread) from Amazon.
|
In your shoes I'd take a nut off of another wheel and take it over to the local truck parts place and hand it to the parts guy and say "I need another one of these". He would at least be able to tell you the stud size and thread.
A truck tire place would be another option.
__________________
Semi-retired technogeek...electronics / computer / 2-way / ham radio... WA6ILQ (45+years)
1985 Fleetwood 32' Southwind (Chev P30/454/TH400), dubbed "Lazarus" by friends... I resurrected it from the dead...
|
|
|
|
|
12-10-2022, 04:47 AM
|
#6
|
|
Senior Member
Join Date: Jan 2017
Location: Little Rock, Arkansas
Posts: 2,573
|
Quote:
Originally Posted by AnotherMike
In your shoes I'd take a nut off of another wheel and take it over to the local truck parts place and hand it to the parts guy and say "I need another one of these". He would at least be able to tell you the stud size and thread.
A truck tire place would be another option.
|
My thoughts as well. Even Autuzone might help. Our local one has a board with threaded studs sticking out. Find the one the nut will screw onto and you know the thread pitch and diameter.
__________________
2021 Keystone Outback 221UMD
2018 Tundra Limited 5.7 liter
|
|
|
|
|
12-10-2022, 10:20 AM
|
#7
|
|
Senior Member
Fleetwood Owners Club Freightliner Owners Club
Join Date: Nov 2011
Posts: 471
|
If your covers are Dicor, you can buy direct from Dicor's website. They will have all the information you'll need to get the correct pieces/sizes
__________________
2007 Fleetwood Expedition 38L
Nowhere special to go...... and all day to get there!
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
