I'm confused and need some clarification...
I see 2 red/pos terminal connectors andv2 black/neg
The neg appears to have 2 cables w 1 attached to each connector + the jumper.
Where do these go? Possibly one chassis. & one engine ground point?
The pos appears to have one cable attached and one jumper + a jumper
Is the question what is the clean post supposed to be connected to?
Is there another red/pos cable hidden?
I can imagine one pos to a batty switch and a second cable that bypasses the sw. This arrangement is not uncommon as frequently the ECM (eng computer) is always powered to retain settings.
The other possibility is one main pos cable to starter and second (fused?) To the emergency start / parallel sw solenoid/ batty combiner
Sent from my SM-T878U using
iRV2 - RV Forum mobile app