Originally Posted by KtownKajun
I would Check to make sure the thermocouple for the pilot is in the flame for the pilot light. They have a safety feature and the Pilot will not stay lit when it doesn’t sense a flame �� this is to stop the gas from flowing with no flame reducing the risk of fire or explosion.
I concur... either the thermocouple is out of adjustment to pilot flame or is bad and needs replaced..[ Any propane outfit/supply house will have them..]
Before starting to work on the pilot assembly.
Remove the oven door [should just take 2 small nails thru the holes on the hinge framework to lock half open & lift up and remove as a unit]
I didn't know that the hinges are very weak and If you put a heavy casserole pot on the open door, the weight will deform the hinges, leaning on the open oven door while working on the internals will cause the same issue..