Norcold fridge won't work on LP

[rbkane]

The Norcold fridge works well on ac but not on lp. Ive replaced the igniter, burner, and gas line. The flame on the burner looks good, but after a few seconds it shuts off. Could the issue be the gap between the igniter and burner or control board? I'm thinking that the gap is important only for ignition. That leaves the board as the culprit, but that is an expensive fix. Any help will be greatly appreciated.

[sibe]

I replaced the igniter electride and igniter box, in mine couple weeks ago

,, works fine now, make sure igniter electrode gap is around 1/8-3/16 inch and in the flame when on..

[153stars]

The electrode is also flame sensing rod the flame should be touching some but not in the center of the hottest part of flame as to overheat the metal and cause it to scale up faster.