|
|
08-29-2019, 12:55 PM
|
#15
|
Junior Member
Join Date: Jan 2014
Location: el paso texas
Posts: 25
|
hi proflangue, if I understand these guys writing the post, your problem is not the thermister, according to one post, your refer should be freezing everything, but you said it was warm. So the thermister does not appear to be your problem. If you are missing the 12 volts the refer will not work, missing the 120 it should revert to gas, if gas is available. If your stove works, gas should be present. I have had this problem twice, it was the circuit board in the outside refer compartment. That board does have a fuse on it you can check, it is under the cover though, Charlie King
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
08-29-2019, 05:10 PM
|
#16
|
Senior Member
Join Date: Nov 2015
Posts: 26,843
|
ProfLangue
Fridge still not working?
__________________
I took my Medication today. HAVE YOU?
Dodge 3500 w/Tractor Motor
US NAVY---USS Decatur DDG-31
|
|
|
08-30-2019, 10:50 AM
|
#17
|
Senior Member
Commercial Member
Join Date: Jun 2005
Location: behind the steering wheel
Posts: 2,576
|
there is a reset on the control board. i have found that fixes about 50 percent of the refer problems.
its a small hole you stick the end of a paper clip into.
look on the service manual for the location.
|
|
|
08-30-2019, 12:33 PM
|
#18
|
Senior Member
Join Date: Nov 2015
Posts: 26,843
|
Quote:
Originally Posted by azpete
there is a reset on the control board. i have found that fixes about 50 percent of the refer problems.
its a small hole you stick the end of a paper clip into.
look on the service manual for the location.
|
WHat brand/model is that?
__________________
I took my Medication today. HAVE YOU?
Dodge 3500 w/Tractor Motor
US NAVY---USS Decatur DDG-31
|
|
|
08-30-2019, 07:58 PM
|
#19
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,971
|
Quote:
Originally Posted by Old-Biscuit
WHat brand/model is that?
|
From what I can find, there is no paper-clip push to reset for any Norcold model.
Evidently I learned something new today: Norcold control board reset.
This pdf concerns the(my model) 120xxx model: http://bryantrv.com/docs2/docs/reset.pdf
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
08-30-2019, 08:34 PM
|
#20
|
Senior Member
Join Date: Jan 2019
Location: Macomb MI
Posts: 212
|
Quote:
Originally Posted by Gary RVRoamer
Good sources above, but "stopped working" rarely involves the thermister. If the thermister failed, there is a "back-up operating system" that kicks in to keep the fridge cooling.
Perhaps if you told us more about "stopped working", we could better advise where the problem lies.
|
This is 100% knowledge. If it fails at 135 oems. and that is 35 degrees (value for example only) How would it know it failed?
|
|
|
08-31-2019, 08:28 AM
|
#21
|
Senior Member
Workhorse Chassis Owner
Join Date: Sep 2007
Location: st.charles mo.
Posts: 1,482
|
There is a way to reset the circuit board. It is explained in the service manual. It involves jumping across two terminals 0n the board or something like that.
|
|
|
08-31-2019, 08:46 AM
|
#22
|
Senior Member
Join Date: Nov 2015
Posts: 26,843
|
Quote:
Originally Posted by speed racer
There is a way to reset the circuit board. It is explained in the service manual. It involves jumping across two terminals 0n the board or something like that.
|
There are 3 different metods to reset a Norcold Fridge circuit board.
Depenfing on MODEL and SERIAL Number which mehtod should be used
__________________
I took my Medication today. HAVE YOU?
Dodge 3500 w/Tractor Motor
US NAVY---USS Decatur DDG-31
|
|
|
09-12-2019, 11:47 AM
|
#23
|
Senior Member
Join Date: Nov 2015
Posts: 26,843
|
Whee did the OP go???
Fridge still not working?
Fixed, gave up ???
__________________
I took my Medication today. HAVE YOU?
Dodge 3500 w/Tractor Motor
US NAVY---USS Decatur DDG-31
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|