Outer dually wheel valve stem extenders

[tada]

My Bounder already has some inner dually valve stem extenders similar to this that makes them easy to air up.

https://www.amazon.com/Ninth-City-St...70_&dpSrc=srch

But my outer wheel valve stems point inward and are a bear to get at even with a double sided chuck.

Can anyone recommend a good set of extenders for that purpose?

Thanks, Tom

[Quincy]

Originally Posted by tada

My Bounder already has some inner dually valve stem extenders similar to this that makes them easy to air up.

https://www.amazon.com/Ninth-City-St...70_&dpSrc=srch

But my outer wheel valve stems point inward and are a bear to get at even with a double sided chuck.

Can anyone recommend a good set of extenders for that purpose?

Thanks, Tom

You might be able to twist it to a more accessible angle That is, unless it is already straight. If so then check Amazon they have them.

[JFXG]

Drop into a truck shop, or sometimes just a good auto parts place. They have available solid valve extensions with bends at a variety of angles, including reverse angles 120, 135, or 150 degrees.
I have these reverse bends on my outers, and long flexible extenders on my inners that are run out and attached to the large center hubcap.

[Bigd9]

If your outer wheel has valves like these, you can loosen the nut, and turn the valve around so it is either pointing out or parallel to the wheel. I turned mine so they were parallel.

[tada]

I ordered some solid 180° extenders. My outer valve stems point completely inwards. You can’t even see them unless you feel around. The previous owner added the flexible extensions for the inners that are attached to the wheels with clamps.