I'm having an issue with my '01 Monaco Diplomat. The front slide will not operate when using the 'In/Out' switch. There is power going in and out of the switch, and if I jump power to the appropriate wires at the slide relays in the battery compartment, the slide will go in and out. Is there something that interrupts the power going to the relays? If I turn the ignition switch 'on' the slide switch still has power to it. I'm not sure if the ignition cut-out relay is in-between the switch and the relays.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Thx for the reply, i found the issue, rodents!! After tracing the wiring loom down to the space above the fuel tank, which sits in the middle of the frame underneath the main living space. I found a small wiring disaster. something chewed through 3 pre-molded wiring harnesses along with 1/2 rubber gas vent/return hose and numerous wires in a harness loom. After contorting my way into the very small area and 100+ deg heat yesterday all is repaired and hopefully our rapidly approaching trip will be incident free.
Linear Mode
