Community Forums

Rivrman2 · 07-24-2015, 08:37 PM

I have Ramco mirrors on my coach. I'm trying to move (adjust) the pivot arm. It won't move. I called Ramco and they said - remove bolt and tap the arm back and forth until loose. I've done that and even sprayed Blaster inside. I've hit it much harder than just a tap and still no movement. Any suggestions?

Kahoona · 07-25-2015, 06:27 AM

That can be really frustrating! Keep the blaster sprays up, perhaps alternating with WD40 which is thinner. Are you using a rubber hammer? I like that the best myself. Keep trying and spraying for as much as 2 weeks. Are you certain that there is only the one bolt and nothing else? Hope you get it.

Rivrman2 · 08-20-2015, 05:06 PM

Update
After several attempts, I decided to remove the mirror and send to Ramco. Since the arm was stuck I had to cut off the plastic mount cover so I could get access to the mounting screws.
In exactly one week the repaired mirror was returned to me in excellent condition. I spoke to a man named David in customer service and he did a great job!
I wish all RV suppliers were this responsive to their customers!