|
|
10-02-2017, 10:46 AM
|
#1
|
Junior Member
Join Date: Sep 2017
Posts: 10
|
Ramps
I just got into a project MH and started to think about my ramps,
the say 12,000lb. GVW Capacity my MH is 14,500
now I don't know the split of each axle but making wonder.
my 4X4 is 6k so I never questioned it but now I am.
I am not sure how they rate these things, IOW is that 12k how much are they assuming is per axle? The more I think it looks like it's not going to be a good idea.
I need to get under it for a fair amount of work, what do you guys offer for advice for the DIY repair maintenance.
I am not a small man, so I need a little extra clearance.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-02-2017, 10:51 AM
|
#2
|
Senior Member/RVM #90
Monaco Owners Club
Join Date: Nov 2002
Location: Columbus, MS
Posts: 54,771
|
Hi ! Welcome to IRV2! We're sure glad you joined the gang!
Sorry I can't answer your question. Keep her between the ditches!
Good luck, happy trails, and God bless!
__________________
Joe & Annette
Sometimes I sits and thinks, sometimes I just sits.....
2002 Monaco Windsor 40PBT, 2013 Honda CRV AWD
|
|
|
10-02-2017, 11:54 AM
|
#3
|
Senior Member
Join Date: Dec 2013
Location: Lake Havasu City, AZ & Plover, WI
Posts: 6,403
|
There should be a sticker in your MH stating the axle ratings for front and rear. If not go to a scale and have it weighed. You should do that anyway to know what the correct tire pressure should be. The weight results will tell you if your ramps are adequate or not. Some people build ramps with 2x8 or 2x10 lumber to have a solid ramp that can not fail.
__________________
2006 Monaco Executive 44 Denali
2013 43 QGP Allegro Bus ( SOLD )
2013 Avalanche
|
|
|
10-02-2017, 12:23 PM
|
#4
|
Senior Member
Thor Owners Club Ford Super Duty Owner
Join Date: Jul 2011
Posts: 3,795
|
Unless you can confirm, with no doubt what so ever, treat the ramps the same as jack stands in that the advertised capacity is the combined capacity of both items working together. In other words each ramp has a capacity of 6,000 lbs.
I prefer jack stands to ramps. A bit more flexible especially if the work involves removing a wheel. Found 12 ton jack stands and a matching bottle jack at Northern Tools. In theory one jack stand will support my coach at 18,000 lbs. GVWR loaded to the axle limits.
__________________
2006 Hurricane 31D built on a 2006 Ford F53
|
|
|
10-02-2017, 02:18 PM
|
#5
|
Senior Member
Join Date: May 2012
Location: Roseville MN sum / La Feria Tx winter
Posts: 790
|
Our ramps are stacked 2x12s with 45 degree cut on one end about 18" long they will hold any thing and can get rig up 6 inches. I then air up suspension and can do maint with out worry
__________________
Sheri & Don 2003 Dynasty 42" regal ISL 400
2007 Goldwing Trike Gmc 4X4 w/ autoloader for trike
Lets go we got it all loaded.
|
|
|
10-02-2017, 04:17 PM
|
#6
|
Member
Winnebago Owners Club Vintage RV Owners Club Gulf Streamers Club Ford Super Duty Owner
Join Date: Jan 2012
Posts: 51
|
About the same as Dupdyke..... Works great..
|
|
|
10-02-2017, 06:22 PM
|
#7
|
Registered User
Join Date: Mar 2015
Location: LA, Lower Alabama
Posts: 2,430
|
Quote:
Originally Posted by sdkid
About the same as Dupdyke..... Works great..
|
Me three. I made 6 ramps with the 2x12, stacked 4 high, angled cut and top plate about 18" long. Gives me a true 6" lift and with all 6 wheels supported, stable. Raises coach enough that I can slide under on the creeper with air dumped. They aren't light weight, stand about 4' long and I use a box dolly to move them around in pairs.
|
|
|
10-02-2017, 06:39 PM
|
#8
|
Senior Member
Join Date: Dec 2014
Location: Cen Il.
Posts: 710
|
Quote:
Originally Posted by Dupdyke
Our ramps are stacked 2x12s with 45 degree cut on one end about 18" long they will hold any thing and can get rig up 6 inches. I then air up suspension and can do maint with out worry
|
So what is going to happen to you when an air line breaks or bag rips open or the dump valve falls when your under the coach?
Unless you put stands up to the frame your betting your life.
Good luck
Pointrow
__________________
2014 Fleetwood Providence 42p
|
|
|
10-02-2017, 07:36 PM
|
#9
|
Junior Member
Join Date: Sep 2017
Posts: 10
|
thanks, guys
I was thinking cinder block with a 2X12 I'd like to get it about a foot up
my father was a bus mech, and while he was setting the lift the bus lean for handicap, it goes down about 2" off the ground to match the curb (city bus)
I do not trust air systems.
some blocks some 2x12 and still have some jack stands
|
|
|
10-02-2017, 08:24 PM
|
#10
|
Senior Member
Forest River Owners Club
Join Date: Dec 2010
Location: Livingston, TX
Posts: 1,088
|
NEVER EVER crawl under ur coach trusting air bags to keep it from crushing you !!!!!
|
|
|
10-02-2017, 09:14 PM
|
#11
|
Senior Member
Join Date: Sep 2017
Location: Medicine Hat AB
Posts: 456
|
Cinder blocks?
Not a chance. They have been known to crumble and kill the home mechanic. I have seen it personally.
Get a proper jack, jackstands or a ramp rated for the weight.
__________________
Current:2008 Triple E Commander 3202FB V10, F53, CHF, Safe-T-Plus, 5Star tune, 2008 Edge Limited AWD Toad, Ready Brute Elite towbar, Demco baseplate
Past: 8 RV's over 32 years.
|
|
|
10-03-2017, 04:30 AM
|
#12
|
Senior Member
Thor Owners Club Ford Super Duty Owner
Join Date: Jul 2011
Posts: 3,795
|
No bricks, cinder block and such. As TripleEEE posted they will crumble without warning and drop the coach. You're dealing with a lot more weight than the average car or truck. Stick with steel or wood.
If you do use ramps for the rear axle both tires of a dual must be fully supported. One tire does not have the capacity to support the weight of the coach.
__________________
2006 Hurricane 31D built on a 2006 Ford F53
|
|
|
10-03-2017, 06:24 AM
|
#13
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Holiday Rambler Owners Club
Join Date: Jul 2012
Location: Lexington, SC
Posts: 2,818
|
See the following post for a detailed description on how to make ramps.
http://www.irv2.com/forums/f107/proj...ml#post2798549
I also purchased the following jacks for additional safety whenever you are going under your MH.
https://www.summitracing.com/parts/SXT-1522
__________________
Vera & Ken
1998 Holiday Rambler Imperial, RR8S Chassis
Cummins 6C8.3 mechanical engine, 325HP, 3060 Allison
Towing 2014 Ford Explorer
|
|
|
10-04-2017, 05:42 AM
|
#14
|
Junior Member
Join Date: Sep 2017
Posts: 10
|
noted, no blocks reading the thread .
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|