Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 02-25-2011, 07:26 PM   #1
Junior Member
Join Date: Jul 2010
Posts: 1
Rear View Monitoring System

I have a 1996 National Dolphin with a AudioVox AOS 22 monitoring system. When the camera is mounted in it's normal position the TV blinks. Remove the camera and a perfect picture. I have removed and mounted it several times, cleaned it, checked all contacts and remounted it and it blinks. You have a picture but it blinks. Also is the cable that runs from the camera to the monitor compatable with other systems?
hsears13 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-26-2011, 12:08 AM   #2
Vintage RV Owners Club
Solo Rvers Club
Join Date: Jan 2011
Location: Pahrump Nv
Posts: 41
Just a guess, but maybe it has something to do with the camera grounding to the chassis of the coach. You say when you take it off it works good.
You could try isolating the camera by screwing a piece of wood to where you want the camera, then screwing the camera to the wood. Just make sure the camera bracket does not touch the mounting screws for the wood, and the screws used to mount the camera do not go all the way through the wood.
Might not fix anything, but all it will cost you is some time to try.
DannyB1954 is offline   Reply With Quote
Old 02-26-2011, 01:36 PM   #3
Senior Member
seasonedsole's Avatar
Mid Atlantic Campers
Ford Super Duty Owner
Join Date: Sep 2010
Location: NE PA
Posts: 154
As far as being compatible with other systems, I'd check on anything added since production. Examples: wireless thermometers, remote A/C - thermostats,, GPS, Cell phones, I-Pods, and so on. Does engine running - not running have any influence? Any electronics inside that are close to camera or wire? Condition of the wire close to camera? I've herd of a ScanGauge II causing the screen to roll. Good luck
seasonedsole is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Road Relay Monitoring System lthrnk Cummins Engines 11 03-02-2008 05:53 PM
Rear View Camera Question? RayT MH-General Discussions & Problems 3 02-04-2008 02:53 PM
SAF-TEE Tire Monitoring system WALT888 MH-General Discussions & Problems 4 12-31-2007 03:02 PM
Rear view mirror rvrat Winnebago Industries Owner's Forum 8 03-23-2005 05:27 PM

All times are GMT -6. The time now is 09:16 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.