|
|
12-26-2018, 06:11 AM
|
#15
|
Senior Member
Join Date: Dec 2000
Location: Weatherford, Tx 76086 USA
Posts: 1,715
|
For those that want to leave tile and want to add wood up to it, there is a product called carpet shims. The shim is a board 4 foot long by 12 inches wide. It is tapered. They come in 1/2, 3/8, 14, 1/8 and they slope down to zero height. These are made either of particle board or if you have lotsa cash, rubber.
Beats the heck out of adding plywood throughout. NOT available in box stores, that I know of.
__________________
Ernie Ekberg
Foretravel
Mineral Wells, Texas
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
12-26-2018, 09:36 AM
|
#16
|
Senior Member
Join Date: Oct 2017
Location: Elk Grove CA
Posts: 1,618
|
Quote:
Originally Posted by ronster
Glad to hear you're still here,read some of your posts about 4 years ago.Did the floor front to back in my 03 phaeton.Used bamboo,about 3/4 thick.glued down.Pulled furniture left carpet on slide but replaced it.A local installer charged me $200,did about 80 % in a day.I did all the detail work around the cabinets and the front of the mh.Its been 4 years,still love it.Down side ...added weight to mh,lots of work adding plywood to make floor even as kitchen area was tile and higher than living room area.You can do it!!!
|
$200 is a great price, someone else (either on IRV2 or Winnieowners) posted a $400 independent installer price which is also worth not doing it yourself.
And, good point about the weight, carpet is significantly lighter than pretty much any kind of plank flooring, something to keep in mind.
__________________
BobC
2002 Itasca Suncruiser 35U
Workhorse Chassis
|
|
|
12-26-2018, 03:40 PM
|
#17
|
Senior Member
Join Date: Feb 2011
Posts: 337
|
Thinking about putting large vinyl tiles over old sheet vinyl and leaving carpet on dog house and slides. Comments please .
|
|
|
12-26-2018, 03:49 PM
|
#18
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner Coastal Campers
Join Date: May 2015
Location: Florida
Posts: 770
|
Quote:
Originally Posted by Cacique
I did a 32 feet terra two years ago and in about 10 days because I had some underflooring to replace. Did not like the color of the wood
|
I mean the collos of the underflooring wood. It looked dark like there had been moisture before so I replaced a few feets and then installed vinyl planks on entire coach exept cockpit for noise and temperature reasons. Came out exelent so good that I received offers I could not resist.
|
|
|
12-26-2018, 03:54 PM
|
#19
|
Senior Member
Join Date: Dec 2000
Location: Weatherford, Tx 76086 USA
Posts: 1,715
|
Large format tiles are fine in a large room. They are a PIA to put in a coach and down the hall. I will never install them, ever, again.
__________________
Ernie Ekberg
Foretravel
Mineral Wells, Texas
|
|
|
12-27-2018, 11:59 AM
|
#20
|
Senior Member
Join Date: Oct 2017
Location: Elk Grove CA
Posts: 1,618
|
Quote:
Originally Posted by Ernie Ekberg
Large format tiles are fine in a large room. They are a PIA to put in a coach and down the hall. I will never install them, ever, again.
|
I agree, luxury vinyl (plank or peel and stick) i6" to 8" x 48" size is easy to install. The narrow width minimizes cutting width-wise while the long length makes things go relatively fast. The same goes for laminate and engineered wood.
I did use large format (19" x 19") commercial quality carpet tiles, which weren't too difficult to fit and much easier than sheet carpet. I squared off the angles where the carpet and tiles met to make things easier to fit and trim.
__________________
BobC
2002 Itasca Suncruiser 35U
Workhorse Chassis
|
|
|
09-21-2019, 05:41 PM
|
#21
|
Junior Member
Join Date: Jun 2017
Posts: 19
|
LVT Planks
I'm not a full-timer. My Class A is stored most of the winter in NJ. How does LVT hold up in a non-climate controlled situation like mine.
__________________
Chuck
'95 Holiday Rambler Vacationer
35' Ford Chassis
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|