Refrigerator problem

[153stars]

Smart. I don't know why I don't remember reading to do that.

Originally Posted by moisheh

Do you have an emergency exit window in the front area. That window is hinged. At the top there is a female rail
Similar to an awning rail. The window hangs from that rail. At either end of the rail there are small screws. Remove the screws
Spray the rail with wd40. Unlock the red handles for the emergency exit. The window can now be slid and removed. Your fridge should go through the window opening after you remove the doors. I also removed the blond and the valence

[cdrifter]

That was an option but I can't find any refrigeration mechanics that will take on the job of replacing a cooling unit on this refrigerator. They say it's just too much wiring too many circuit boards and just too much of a headache..

[cdrifter]

That looks very doable. It looks like you got it in without taking the captain's chairs out...
Now I just need to find a refrigerator that will fit in the hole inside. I found that a RM 1350 dometic Which is a perfect match replacement fit for the
NDA1402.. But they must have carved it out of a block of pure gold because they want over $6000 for it..!!!! Exact same measurements all the way around so I don't know what makes it more expensive by $3000..SMH
Still searching for a residential compressor unit.. that' if I can find 1. Then I have the option of taking that driver's side window out instead of trying to get it through a 27 1/2" inch entry way door..
The measurements I'm working with... Fridge..
63.1 x 32.75 x 26.06
That is height width and depth...
Hard to find any residential refrigerator near that size that has any Extras like water in the door or ice maker.. Which I have now... Most are little small apartments size units very plain Jane, no extras..