Removal of barrel chair in motorhome

[bdba673]

Ow to access the bolts under floor the cargo area is under the chair and I can't access the bolts.

[musicman51]

HI i just had mine out to replace the floor tile and they were just 3" lag bolts.

[BichonLover]

Originally Posted by musicman51

HI i just had mine out to replace the floor tile and they were just 3" lag bolts.

Ditto.

[bdba673]

Originally Posted by bdba673

Ow to access the bolts under floor the cargo area is under the chair and I can't access the bolts.

the bolts that secure mount to floor are lag type bolt to access the nut you enter the cargo area which is lined with a plastic line covering the nuts. are the nuts secured to the chassis or do i cut a hole in the liner?

[mpdrv]

on my previous coach I replaced the floor and took out the chair. the passenger chair and driver chairs nuts were attached, but when unscrewing the barrel chairs bolts, i could hear the nuts drop. Several nuts dropped and I was able to remove the barrel chair. Problem was replacing the nuts, my arms were to short to reach and my socket extenders were to short. I made a long extender out of steel rod by grinding to a square head to fit the socket and used a pipe wrench to tighten. Good luck.