Removing Dining Table

[Cicada]

2012 Winnebago-Itasca Sunova..We would like to remove dining table but having trouble doing so. Can't get it to pull out. Any suggestions?

[RCCFleetwood]

Originally Posted by Cicada

2012 Winnebago-Itasca Sunova..We would like to remove dining table but having trouble doing so. Can't get it to pull out. Any suggestions?

This may be a dumb response, but it looks like a clamp on the top of section two that is still closed. Did you open that one, too?

Try twisting the table left and right gently?

WD-40 spray or similar?

[Cicada]

Originally Posted by RCCFleetwood

This may be a dumb response, but it looks like a clamp on the top of section two that is still closed. Did you open that one, too?

Try twisting the table left and right gently?

WD-40 spray or similar?

RCCFleetwood. Yes we had both clamps unscrewed, used wd-40, rocked back/forth, turned clockwise, counter clockwise. It raised about 1", but we can't get it to go any further..Gotta be a way

[johnerotten]

I believe that the tubing connected under the table is designed to telescope up and down..Up for eating and down for making the bed.The two clamps are to hold it in the up position..Complete removal may require taking the screws out of the floor base..