My right hand camera has stopped working. All I get when I turn the right blinker on is a white screen. Any idea if this is just a loose connection or if the camera is bad?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,786
Welcome to irv2.
I would check the wiring behind your outside camera lens road vibrations will loosen up wire connections.
The connections maybe in fender wheel well or fire wall area,
I agree, check the connections first. Then I would remove the probable bad camrea and plug it into the left camera wire. that will let you know if the camera is bad, or it is something upstream, like the cable.
Nor'easters Club Forest River Owners Club Freightliner Owners Club
Join Date: Nov 2011
Location: Lancaster, New York
Posts: 36
I also had that happen to me. Found the connection under the dash by the display unit had come loose. Mine was just a plug connection. Easy fix. Good luck!
__________________
Finally completed all State visits in August 2011 with a trip to North Dakota.
It was actually water that had gotten in the camera. Perimeter View is sending me a new camera since I'm only 2 months out of warranty! Good news as it's about $350 to buy a new one.
Linear Mode
