Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-11-2021, 12:51 PM   #1
Junior Member
 
Join Date: Jul 2015
Posts: 16
Right Rear Curved Molding

1998 Winnebago Brave 32.
While backing up I missed judged the distance from a wooden post. The post (not me of course) did a nice job of smashing the lower portion of the right rear curved molding and bent the bumper a bit. I was amble to remove and straighten the bumper, however, the lower section of the curved molding is crunched pretty bad. Does anyone know of a source (either new or possibly used). The molding color is white.

Thanks for any comments or suggestions.

Tom
turbineman is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-11-2021, 07:30 PM   #2
US1
Senior Member
 
Join Date: Jan 2020
Posts: 617
Are you asking about the metal corner trim that extends the full height of the RV or the bumper end cap?
I jackknifed my Brave last yr and searching for a replacement corner proved to be no good. None of the RV salvage yards had any as they are a very common item that gets damaged. I had a sheet metal shop make me 2 new ones as both sides had some battle scars. I just replaced the one I damaged as I traded the RV in the next day and the otherside wasnt commented on by the dealership.
__________________
2001 Winnebago Brave SE29 Workhorse P32 7.4L (previous)
2007 Fleetwood Bounder 33R, F53 chassis, V10 (current)
US1 is offline   Reply With Quote
Old 07-12-2021, 07:51 AM   #3
Junior Member
 
Join Date: Jul 2015
Posts: 16
Actually both parts are damaged.
Good idea. Thanks for the tip.
Tom
turbineman is offline   Reply With Quote
Reply

Tags
rear



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to repair outside right rear molding on '85 Winni SawBrodie Vintage RV's 7 10-03-2019 09:47 AM
Right Rear Vertical Edge Molding turbineman Class A Motorhome Discussions 3 10-05-2018 12:41 PM
Broken curved shower glass door supercub Monaco Owner's Forum 24 10-10-2010 08:40 AM
Gen-turi Hookup To Curved Gen Exhaust? Tarheel MH-General Discussions & Problems 2 06-27-2010 01:52 PM
SEA Curved Shower Installation Instructions Lukeaa Monaco Owner's Forum 0 08-20-2009 09:27 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 11:03 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.