Seatbelt Binding

[kwiebe]

Anyone have a fix for:

Driver and passenger seatbelt gets caught in the corner of the guide that is mounted on the wall. Belt comes up from the retractor, goes through the guide on the wall, then down toward the seat to be buckled.

But the guide on the wall is a little bit behind the seat, so the angle created causes the belt to shift into the front corner of the guide. This results in the belt catching there and creating slack between there and the buckle.

[Skip426]

If the angle of the guide can't be adjusted , then, pull the belt all the way out and silicone spray the belt , as you allow it to retract through the guide.( allow to dry before using )