Sewer question

[iquilt888]

Has anyone installed the Drain Master waste management sewer system?
If so did you install yourself or have it done? If you did it yourself was it easy enough for a non mechanical person to do?

Look forward to any and all comments.

[spinn]

Yes, yes, yes and yes :-). It was very easy to do. I chose to glue the cam-loc fitting to the rv's drain port but you could just use a twist adapter. The Drain Master hose seems to be made of really high material. It is pricy but works really well.

It worked out do well that I have changed all the fittings on both my drinking water system (water softener, filters, etc) and tank flush system to cam-loc fittings, no much nicer than the quick house adapters available at home centers.

Steve

[stink]

Originally Posted by spinn

Yes, yes, yes and yes :-). It was very easy to do. I chose to glue the cam-loc fitting to the rv's drain port but you could just use a twist adapter. The Drain Master hose seems to be made of really high material. It is pricy but works really well.

It worked out do well that I have changed all the fittings on both my drinking water system (water softener, filters, etc) and tank flush system to cam-loc fittings, no much nicer than the quick house adapters available at home centers.

Steve

Steve, where did you get the cam-loc fittings? I have gone thru many brands and types of quick disconnects on the supply hoses and your cam-locs look like the way to go

[spinn]

Originally Posted by stink

Steve, where did you get the cam-loc fittings? I have gone thru many brands and types of quick disconnects on the supply hoses and your cam-locs look like the way to go

I initially bought some from Northern Tools, but their supply was limited. I landed up getting them from Amazon
http://www.amazon.com/s/ref=nb_sb_ss...am%2Caps%2C287

Having quick connects that don't leak and don't fail after a few months is great!

Steve