Side Camera question

[clink]

Hello all - I recently repaired a ground issue with my cameras and the repair has causes another small issue to arise.

When I use my left and right turn signal the cameras work as intended, however, on each view there is about 1/5 of the screen at the bottom that is really fuzzy/filled with static. Its almost like the image has been moved up in the monitor because even the "Do not rely solely on the camera" message is about 1/5 higher on the screen than normal.

I contacted Alpine (the maker of the in dash unit with the monitor on it) and they claim it has nothing to do with their system.

I know its a bit of a shot in the dark but is there a way to calibrate these cameras...or something that I can adjust to get them centered back in the monitor so I can use them without seeing the static at the bottom of the image?

[Unplanned Tourist]

It almost sounds like you still have a poor connection somewhere.

Maybe go over all the connections again.

Happy Glamping.