2006 Mandalay, some friends were putting the unit away, I believe the left a slide switch in the pressed position in the bedroom. While trying to move another slide, everything stopped. I can heart a click when pressing a button to move a slide, but nothing moves. any help please, need to move the RV
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
For what it’s worth, our 2010 Fleetwood, the slides have a small, square resettable circuit breaker attached to the switched coach bus bar within the Battery Control Center. Maybe you have something similar.
You said you heard a click.
The slides in our 06 Mandalay are hydraulic. When you push the switch to make the slide extend or retract, there are relays and a pump in the front compartment just below the driver. If the first relay (power) does not provide the proper connection, the relay for the pump won't activate either. Start by checking the relays.
You said you heard a click.
The slides in our 06 Mandalay are hydraulic. When you push the switch to make the slide extend or retract, there are relays and a pump in the front compartment just below the driver. If the first relay (power) does not provide the proper connection, the relay for the pump won't activate either. Start by checking the relays.
for the record. when my friend parked the RV and move the slides out, they held the switch to long and the system failed. was in the shop 3 months as they figured out the repairs
Linear Mode
