RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 11-02-2017, 09:23 AM   #1
Junior Member
 
Join Date: Oct 2017
Posts: 2
Transfer switch advice

Could anybody tell me the direct replacement for my power tek pdc 1009 automatic transfer switch. I have a 2000 fleetwood bounder 32h
thanks
4_THE_KIPP is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 11-02-2017, 09:54 AM   #2
Senior Member
 
vsheetz's Avatar


 
Fleetwood Owners Club
Ford Super Duty Owner
Join Date: Jun 2012
Location: SoCal
Posts: 14,928
Quote:
Originally Posted by 4_THE_KIPP View Post
Could anybody tell me the direct replacement for my power tek pdc 1009 automatic transfer switch. I have a 2000 fleetwood bounder 32h
thanks
Another PDC 1009? (-:. But I assume you are asking because it is no longer available. Most any of the transfer switches will pretty much plug and play to replace another. May need to move a cable a bit, and maybe relocate a clamp or two.
__________________
Vince and Susan
2011 Tiffin Phaeton 40QTH (Cummins ISC/Freightliner)
Flat towing a modified 2005 Jeep (Rubicon Wrangler)
Previously a 2002 Fleetwood Pace Arrow 37A and a 1995 Safari Trek 2830.
vsheetz is offline   Reply With Quote
Old 11-02-2017, 10:13 AM   #3
Senior Member/RVM #90
 
MSHappyCampers's Avatar


 
Monaco Owners Club
Join Date: Nov 2002
Location: Columbus, MS
Posts: 43,793
Hi ! Welcome to IRV2! We're sure glad you joined the gang!

Sorry I can't help with the question. Keep her between the ditches!

Good luck, happy trails, and God bless!
__________________
Joe & Annette
Sometimes I sits and thinks, sometimes I just sits.....
2002 Monaco Windsor 40PBT, 2013 Honda CRV AWD
MSHappyCampers is offline   Reply With Quote
Old 11-02-2017, 10:46 AM   #4
Senior Member
 
DENSHER's Avatar
 
Gulf Streamers Club
Spartan Chassis
Join Date: May 2016
Location: Cookeville, TN
Posts: 296
A quick Google search on the PDC 1009 shows that this is a combination Transfer Switch Distribution panel. The ATS relay is part of the distribution panel. Replacement is going to be more challenging, might have to convert to a separate transfer switch wired to a new distribution panel and possibly new converter.
__________________
1995 Gulfstream Sun Voyager MX 34' DP with 2011 Silverado in tow.
Dennis & Sherry.
DENSHER is offline   Reply With Quote
Old 11-02-2017, 01:23 PM   #5
Senior Member
 
Join Date: Nov 2012
Location: bis. nd
Posts: 1,100
hi ,,I just changed mine, was really melted from loose common wires.. smelled bad when it ended...and it was plastic but don't worry about that as they are fire proof, although the do distort.. I hand an old iwota. and replaced with a progressive dynamics model pd52v..$130 from amaz. they are very easy to wire...the fproblem is what gage wire to handle...mine is very thick and I think 6ga, was hard to get into the clamp slots.. what I did was put wire thru hole and cut each wire correct length. on the switch it has very detailed wire position and you would have to be trying if you get it wrong. ooh mine is 50 amp not 30
__________________
2007 Alfa Gold!! model 1008. 400hp Freightliner, IFS!!
beenthere is offline   Reply With Quote
Old 11-02-2017, 02:42 PM   #6
Senior Member
 
Rkesselus's Avatar
 
Tiffin Owners Club
Join Date: Aug 2016
Location: Bastrop Texas
Posts: 1,279
Contact Iota systems and they will send you exactly what you need and they are very reasonable with their prices.
__________________
2000 Allegro Bus 35R 3126 Cat 300 Allison 3060MD 6 speed
Rkesselus is offline   Reply With Quote
Old 11-02-2017, 03:30 PM   #7
Senior Member
 
Join Date: Nov 2012
Location: bis. nd
Posts: 1,100
they are not making switches anymore. after the big recall on them years ago .. mine was an iota.. sorry had spelled wrong above.. and I should post a pic
Attached Thumbnails
Click image for larger version

Name:	20170904_152914.jpg
Views:	39
Size:	275.3 KB
ID:	181753   Click image for larger version

Name:	20170904_152957.jpg
Views:	37
Size:	258.7 KB
ID:	181754  

__________________
2007 Alfa Gold!! model 1008. 400hp Freightliner, IFS!!
beenthere is offline   Reply With Quote
Old 11-02-2017, 03:34 PM   #8
Senior Member
 
Join Date: Nov 2012
Location: bis. nd
Posts: 1,100
the new ones are not like that anymore.. shore and gen on one side and to panel on other side. if I was you I would save some of those wire connections, someday you may need to repair cut or damaged wire to shore or to switch ect. then use marine wire shrink and is good.
__________________
2007 Alfa Gold!! model 1008. 400hp Freightliner, IFS!!
beenthere is offline   Reply With Quote
Reply

Tags
advice, switch, transfer switch



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Transfer Switch will not switch...... Rook RV Systems & Appliances 11 11-14-2015 08:22 PM
need advice choosing a TRANSFER SWITCH recaffey Monaco Owner's Forum 12 08-27-2015 12:02 PM
Transfer switch takes minutes to switch after starting genny erkme73 Tiffin Owner's Forum 8 08-12-2012 07:24 PM
50 amp automatic transfer switch, power switch dutch99 Newmar Owner's Forum 16 08-08-2011 09:13 AM
Automatic Transfer Switch (Power Switch) Ragman National RV Owner's Forum 2 07-18-2011 10:51 AM


All times are GMT -6. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.