Community Forums

Mile Marker 42 · 02-25-2021, 05:00 PM

Has anyone with a somewhat similar coach replaced the sensors on their tanks but used the factory board/gauge in the motorhome?

Dunrollin · 02-26-2021, 04:16 AM

I have an older unit, not the same as yours so this may be off a little bit, but my plan is to upgrade to a Seelevel system. I have done two of these before and the benefits are great compared to OEM. Usually the same wiring can be used and you get a rock solid %age reading of each tank.

My gauges still "work" but being used to accurate readings the little leds are somewhat useless.

Mile Marker 42 · 02-26-2021, 11:39 AM

Quote:

Originally Posted by Dunrollin

I have an older unit, not the same as yours so this may be off a little bit, but my plan is to upgrade to a Seelevel system. I have done two of these before and the benefits are great compared to OEM. Usually the same wiring can be used and you get a rock solid %age reading of each tank.

My gauges still "work" but being used to accurate readings the little leds are somewhat useless.

So you did or did not use your OEM gauge board?

Teamfoxy · 02-27-2021, 10:49 AM

The BW and GW tank guages have never worked right in any RV that I have ever owned in the last 14 years. Friends with a new Beacon with the touch screen control panel have the same issue. We learned to live with it and know when its time to dump again.
My advise is to not worry about and save your money.