what do I use to reattach fender well flares?

[Dave-Oh]

While washing the rig I noticed that two of the fender well lips or flares were not attached all the way around. Was wondering what folks use to re-adhere them.

[znt1186]

3M double sided tape from auto parts stores.

[mojoracing]

They usually use screws or nuts and bolts in the wheel well under the lip or double sided tape tp adhere them.

[ga traveler]

Originally Posted by znt1186

3M double sided tape from auto parts stores.

Times 2. Just make sure you use alcohol swabs to clean both surfaces before you use the tape.

[Lifemember]

I hahttp://www.autozone.com/sealants-glues-adhesives-and-tape/body-trim-adhesive/3m-tube-plastic-emblem-and-trim-adhesive/316901_0_0/?checkfit=trueused this with good results

[Wryly Blithe]

What? You never heard of duct tape?

[Dave-Oh]

Originally Posted by Wryly Blithe

What? You never heard of duct tape?

I LOVE duct tape. It is the bacon equivalent in the tool world: it makes everything better!

I think I'll go with the 3m double-sided tape this time, though. Do I use any clear silicone around the edge,too to prevent water intrusion?

I actually didn't feel any screws around the inside - I think they're totally glued on. I'll double-check when I do the repair.